Automatic Dumpling Production Equipment Designed to Enhance a Food's Handmade Look
- For wrapper
- For filling
- Ground Pork
- Corn Kernels
- White Pepper
- Soy Sauce
Traditionally, people eat dumplings at special occasions like Chinese New Year. Dumpling consists of a dough wrapper wrapped around a filling. On Chinese New Year's Eve, one of the lucky dishes is dumpling, because when wrapping filling, good luck is also wrapped into dumplings. All people who eat the dumplings can have good luck in the coming year. For this reason, on that day, every family will make dumplings, starting from kneading dough and preparing ingredients of filling. All family members sit around a table and wrap dumplings together. It is always a great time and memory when it comes to dumplings.
Now, dumpling becomes a food eaten as a meal at any time. When you want a quick meal or don't know what to eat, you can buy a bag of frozen dumplings from supermarkets. Boil water, drop dumplings, and 10 minutes later, enjoy them! Or you can have several pieces of cooked dumplings at a little eatery. A dish of dumplings is paired perfectly with soy milk or soup. Some people like to have dumpling soup that dumplings are served in a bowl of soup such as hot and sour soup (酸辣湯) or beef soup.
In addition to the two ways to have dumplings, due to the growth of food delivery in recent years, dumpling delivery to your door is another choice. Perhaps the rising trends would increase the consumption of dumplings.
Handmade Food Recipe
- Ⅰ. For wrapper
- Add flour, water, and salt in a large bowl, then stir them together.
- Knead and press the dough until smooth.
- Rest for one hour.
- Ⅱ. For filling
- Chop scallions and ginger.
- Add ground pork, corn kernels, scallions, ginger, salt, white pepper, and soy sauce in a large bowl, and stir the filling well. Set aside.
- Roll the dough into a long, cylinder shape.
- Equally divide the dough into small balls.
- Roll out the dough ball into a thin wrapper with a rolling pin.
- Spoon filling on the center of wrapper.
- Smear water on the edge.
- Fold it in half and tightly press the seam.
- Pleat the edge.
- Repeat last five steps to wrap all dumplings.
ANKO Team Research Problem Solving or Solution Delivery
Solution 1. From design to reality, a human-centered design process of "handmade dumpling" rotary molds.
It's been a long time since HLT-700XL was launched. During these years, we are dedicated to developing a machine to solve customers' problems rather than to make them have new problems. Therefore, ANKO's R&D team adopts "design thinking", focusing on user experience, instead of mechanical functions. Through 5 stages of design thinking – empathy, define, ideate, prototype, and test – we want to develop a product that meets customers' needs.
Phase 1 – Empathy
There was a lot of feedback from our clients.
"Is the shape of machine-made dumpling as same as that of handmade dumpling?", "Except for these kinds of patterns, are there any options?", "It's easy to recognize machine-made dumplings."
About end consumer's preferences:
"I still love handmade dumplings.", "Let's buy some handmade frozen dumplings.", "The handmade dumplings are full of filling, very delicious."
Dumpling manufacturers or restaurant owners worry that the shape of dumpling affects consumers' appetite and willingness to buy. Most people even think that handmade dumplings are more delicious than machine-made ones.
Phase 2 – Define
Dumpling manufacturers or restaurant owners want to satisfy most consumers' needs to maintain or increase sales, so we have to offer a dumpling machine that can make dumplings with a handmade look. Our R&D team, therefore, set the target of developing a set of rotary molds that could make plump dumplings with realistic pinching patterns.
Phase 3 – Ideate
At this stage, first of all, our rotary mold designers had done a thorough survey on dumpling shape and different ways to fold dumplings. Then, everyone threw out their ideas that helped team members think from different viewpoints, such as engineering, characteristics of cooked or uncooked dumpling wrapper, consumer's preferences and needs. Finally, the ideas were integrated into several types of rotary molds.
Phase 4 – Prototype
After having specific ideas, the designers made prototypes of the rotary molds with a 3D printer. At the fourth stage, our R&D team made many prototypes and went through a continuous process of testing and modifying. Due to the testing process, the ideas had been gradually actualized. The designers developed "Artisan Mold", which consists of two molds to form "plump dumplings" and innovated two pinching pattern molds, one can make dumplings with "handmade pleats" and the other one can make them with "thin edge".
Phase 5 – Test
Finally, these molds were installed on HLT-700U and had test runs to ensure whether they can produce dumplings as required. Our R&D team also tried different setups to find subtle problems and solve them.
On the day of the HLT-700U launch event, these innovative molds are received positive responses. A customer told us that she had wanted to have a HLT-700XL for years, but had yet to make a decision. This time, she saw that the HLT-700U can make such plump dumplings, she knew that it is what she wants.
Food Equipment Introduction
- Dough is extruded into a dough tube.
- Filling is extruded and filled in the dough tube.
- The filled dough tube is formed into dumplings.
Pinching pattern with handmade pleats
The design concept of the pattern comes from a dumpling folding way - holding a dumpling in your palms and pressing it to seal with two thumbs. Our designers researched the marks, edge thickness, and curved lines after pressing and then carefully designed the details of the mold. Dumplings formed by this mold features realistic handmade pleats, appropriate thickness, and natural curved lines.
Processing Line Planning
- Vegetable Cleaning
- Vegetable Cutting
- Meat Mincing
In addition to the innovation of molds, both dough and filling systems of the new HLT-700U Multipurpose Filling and Forming Machine have been optimized to make the production of food more stable and efficient. Innovative dough screws solve the problem of dough spinning in the dough hopper. Dough can be smoothly brought into dough system and stably formed into a dough tube. Due to filling system enhancements, it can work with a wider range of filling including vegetable filling containing larger dices and extrude vegetable filling with less pressure to maintain the texture and taste of vegetables. With the upgrades mentioned above, the production capacity of the new dumpling machine increases by 20% - 50%. For example, an HLT-700U equipped with Artisan Mold can make 12,000 pieces of 25-gram dumplings per hour.
The HLT-700U's main features: The new Multipurpose Filling & Forming Machine - HLT-700U - is capable of mass-producing dumplings with handmade pleats, full filling, and an attractive shape. The Artisan Mold is an innovative design to enhance the dumpling's handmade look.
Taiwan Ethnic Food Machine And Food Processing Equipment Solutions
Our food equipment solutions for clients from over 108 countries. You can click on the following categories to view cases. Each case shows how ANKO conducts food machine solutions - from the beginning of ingredient preparation, machine design and manufacture, troubleshooting and after service.
- Solution Area
- About ANKO
- Can I test the machine and make food before I place an order?
- What if my recipe is confidential or I cannot go to ANKO?
- Do you provide recipe consulting service?
- I would like to start up a food business/expand my business. Could you make a plan for me?
- If I want to add ANKO's food making machine to my existing production line, could you help me combine all machines together and optimize my factory layout?
- Is there a warranty?
- What is covered under the warranty?
- Do you provide machine training?
- What services and benefits are covered in the solution?
- Request for Proposal
ANKO Dumpling Equipment Solutions
ANKO FOOD MACHINE CO., LTD. is a food making machine manufacturer and a food production solution supplier. We've been offering professional food equipment since 1978. With years of experience in the food machine market, ANKO makes sure that our food equipment meets customers' demands.
Food Processing Equipment Solutions
View our new food processing machine and turnkey solutions