ANKO Spring Roll Production Line - Machinery Design for a Canadian Company
- High-Gluten Flour
- Canola Oil
- Green Bean Vermicelli Noodles
Spring roll is one of traditional Chinese foods with a long history. People usually prepare a table of dishes as spring roll stuffing such as fried shiitake shreds, pork mince, bamboo shoot shreds, black fungus shreds, green bean vermicelli noodles, etc. and wrap them with a thin wrapper. After deep frying, the crispy spring rolls are incredibly palatable. For Cantonese, they would say that spring roll is a quintessential food of dim sum.
In recent years, Canada has been a popular place for Chinese immigrants. The unforgettable relish of spring roll is brought to there so that the demand is gradually increasing.
Handmade Food Recipe
- For spring roll wrapper: (1) Mix high-gluten flour, water, and salt together. Well stir them until there are no lumps. (2) Smear some oil on a fry pan. (3) Pour batter in the fry pan and swirl the pan to make batter evenly cover the pan. (4) When sides of spring roll wrapper slightly peel off, apply a spatula to slowly turn over it. (5) Fry the other side for a few seconds and leave it in a plate. (6) Follow the steps above to cook the rest of wrappers.
- For spring roll stuffing: (1) Soak green bean vermicelli noodles in water until soft. (2) Shred cabbage, carrot. (3) Fry them together.
- Wrap spring rolls: (1) Scoop stuffing and put on a corner of a wrapper. (2) Fold the corner first, and the right and left side corner. (3) Then, roll it up.
- After all spring rolls are done. Finally, deep fry them.
ANKO Team Research Problem Solving or Solution Delivery
Solution 1. In order to maintain the stability of depositing stuffing, vegetables should be cut shorter than 2.5cm. Under this condition, how to remain the crispy taste of vegetables?The client is highly concerned with gustatory delights so that he usually chops vegetable stems in large pieces to maintain the crispy taste of cabbage. However, when food is produced by machine, vegetable chops cause the difficulties of forming stuffing and standardizing weight. In order to stably deposit stuffing, one of methods is to cut a whole cabbage into thin strips, though it's not an ideal solution. Then, ANKO engineer raise a brilliant idea to figure out the problem, which is to ...(Please contact us to get more information)
Solution 2. The vegetable stuffing is full of juice without viscosity so that it's scattered over spring roll wrappers as depositing to affect the process of wrapping up.One solution is to add ...(Please contact us to get more information)
Food Equipment Introduction
- Pour cooked stuffing into hopper.
- Pour mixed batter into batter tank.
- Set the temperature.
- Bake wrapper belt.
- Cool wrapper belt under fans.
- Cut wrapper belt into 200mm*200mm squares.
- Turn cut wrapper in position, ready to be fed with stuffing.
- Extrude stuffing: locate stuffing on a set place.
- Fold wrapper: fold the first corner to the center to cover the stuffing, and then seal the stuffing by left and right side flappers.
- Apply glue: apply batter on the last corner as glue.
- Roll up: roll up toward the last corner under rolling net, at the same time, seal the end.
Fundamental of Design
- When there is less oil in stuffing as lubricant, stuffing may be stuck in a hopper, which will affect the flow of producing products. In that case, the design of hopper shape and scraper position is quite important. ANKO R&D team goes through a process of trial and error and finds that the scraper shall ...(Please contact us to get more information)
The scraper ...(Please contact us to get more information)
SR-24SR-24 spring roll production line hourly produces 2400 pieces. The high productivity is referred to a chain of producing process. First of all, the dough belt is made by a big baking drum and cooled immediately by fans. The temperature of baking drum and the thickness of dough belt are easy to control, even the size of pastry can be cut as required. Then, the stuffing depositing machine is connected after the cutter unit. Through a sensor, spring roll stuffing will be deposited on wrappers at the right time. Finally, the unique folding device and stainless net is efficient to form spring rolls.
The process of depositing stuffing - Vegetable stuffing is exactly located on spring roll wrappers via a depositor.
Canada Ethnic Food Machine And Food Processing Equipment Solutions
Our food equipment solutions for clients from over 108 countries. You can click on the following categories to view cases. Each case shows how ANKO conducts food machine solutions - from the beginning of ingredient preparation, machine design and manufacture, troubleshooting and after service.
- Solution Area
- About ANKO
- Is there any difference between food made by machine and by hand?
- I have semi-automatic machines already, could you make a plan to add some extra machines to meet my production requirement?
- I would like to start a food business, could you give me some suggestions?
- I would like to expand my business, but I have no idea about the relevant machine? Could you make a plan for me?
- What can we do if our machine does not work? Is there any warranty?
- What if my recipe is confidential information that cannot be provided to you? How does the machine produce food which meets my requirements?
- How can I train my workers to operate the machine?
- Request for Proposal
ANKO Spring Roll Equipment Solutions
ANKO FOOD MACHINE CO., LTD. is a Taiwanese food processing equipment supplier and manufacturer. They've been offering professional food machinery in multipurpose filling and forming machine markets since 1978. With collected 38 years of experience, ANKO makes sure that their food machinery meets each customer's demands.
Food Processing Equipment Solutions
View our new food processing machine and turnkey solutions